[evovin]

One of the guy that's helping me now with the right parts JAKE MONTGOMERY>>>

http://youtube.com/watch?v=HEM8BRfyNTs

[Dain]

Man he spins a lot out of the hole

[evovin]

EVO 10 in 1/4 mile
http://videos.streetfire.net/video/N...own_156067.htm

[evovin]

AMS turbo kit from PR
http://grs-motorsports.com/noticias/...nas/5mar/6.wmv

[Macaroni]

Holy wheel gap on the launch with that 2nd vid! I'm suprised at the times of the new evo X.

[Dain]

Damn, need some stiffer suspension or something

[Justin_]

Just weld it solid...
lol

[evovin]

he was running stock suspension. Just diff tire/rims set up.

[Macaroni]

So a 9 sec evo can still grip with stock suspension? Why do they even sell suspension for Evo's then? lol

[evovin]

AMS 37R kit

Originally Posted by jvm

The wheels & tires are: Buddy Club QF(15 x 7.5) and M/T 24.5 x 15 x 8. The car use stock suspension,maybe the camera angle or tires pressures, makes the car look's with different high's.{thumbup}

[evovin]

DSM 9.1 @161mph>>

http://www.youtube.com/watch?v=UxbXjON1rPI

[Scott]

He tore through the first 3 gears like crazy fast.

[Dain]

DAMN

[Justin_]

Not impressed I can do a 9.1 (in the 1/8th bahaaha)

[evovin]

PUMP GAS 627whp standard 35R>>

http://www.youtube.com/watch?v=e8NwF3dI6ps

[Birdy]

Dang , nice.

[Dain]

Damn I LOVE 35R evos. Not too laggy and lots of power. Perfect for the street IMO.

HOW does it make that much on pump? Just pushing it? Built motor? Don't stock motor 35R setups hit like 430ish?

[Birdy]

Meth?

edit: I just noticed that they were doing the runs in 3rd gear. Huh?

[evovin]

Here is one example with stock block standard 35R kit in 29psi boost only! We have the same kit but mine is HTA35R.

Originally Posted by NIevo

Finally got the tune alittle better and broke into the 10's in a big way! First run I was seeing 11.3-10.7 AF/R's and 17* peak timing. Knew it was going to be a good run when I hit the rev-limiter in 4th about 20ft from the end of the track. Looked like this:

60' 1.65
1/4 10.80
mph 129.28

Video

Second run a roasted the tires and ran a 11.22@130mph with a 1.89 60'. Finally the third run I knew it felt good out of the hole and even after raising the rev-limiter to 8300 (I know, thats pushing it on the stock internals) I hit the limiter about 50ft from the end of the track. AF/R's were 11.7-11.1 and peak timing at 18*. Here's the breakdown:

60' 1.62
1/4 10.61
mph 131.59

Video

I was running a 50/50 mix of pump and 110 and the meth injection. Running 29lbs boost and seeing zero knock across the board. Traction is really an issue now though. I was either hooking good or just roasting them, its a very fine line. Pulled several 1.9 60's as well.

Is this the fastest ET and mph on a stock block so far? Big props to Buschur either was for making some amazing products at unbeatable prices{thumbup}

Video's will be up in the next couple day's.

Originally Posted by Dain

Damn I LOVE 35R evos. Not too laggy and lots of power. Perfect for the street IMO.

HOW does it make that much on pump? Just pushing it? Built motor? Don't stock motor 35R setups hit like 430ish?

[evovin]

Jake Montgomery is back with 8.8sec@163mph

http://www.youtube.com/watch?v=eHBfP7aDnco